Aqueous Resin Compound TDS | Upgrading Compound TDS

Aqueous resin compound with special additives and product specification and upgrading compound products specification.

Appearance: Milky viscous liquid

Solid Content: 31 ± 2 %

Ionicity: Anionic

 pH: 7.5-9.5

Film Character: Medium soft

SALIENT CHARACTERISTICS

· Smooth covered look

· Strong bonding

· Good rheology and leveling

· Easy plate release

MODE OF APPLICATION AQUEOUS RESIN COMPOUND

Has been designed for corrected grain smooth finishes for belting and shoe upper leathers. Its rheology supports roller coater applications with uniform upgrading film coatings and pleasant touch.

AQUEOUS RESIN COMPOUND is usually employed in the proportions of four times the pigment quantity which ensures very good covering, flexural endurance, and strong rub fastness.

AQUEOUS RESIN COMPOUND WITH SPECIAL ADDITIVES PRODUCT SPECIFICATIONS

Appearance: Milky viscous liquid

Solid Content (%) : 31 ± 2

Ionicity: Anionic

pH : 7.0 - 8.5

Film Character: Medium soft

SALIENT CHARACTERISTICS

· Smooth covered look

· Strong bonding

· Good rheology and leveling

· Easy plate release

MODE OF APPLICATION

 has been designed for corrected grain smooth finishes for belting, shoe upper, and bag leathers. Its rheology supports roller coater applications with uniform upgrading film coatings and pleasant touch.

AQUEOUS RESIN COMPOUND is usually employed in the proportions of four times the pigment quantity which ensures very good covering, flexural endurance, and strong rub fastness.

Aqueous resin compound | Upgrading compound TDS

UPGRADING COMPOUND PRODUCT SPECIFICATIONS

Appearance: Creamy paste

Solid content: 20 + 2 %

pH: 5.0 – 7.0

 Ionicity: Weakly cationic

Solubility: Soluble in water

SALIENT CHARACTERISTICS

· Excellent filling and quick uniformity

· Maintains good flexibility

· Holds up subsequent finish coats

· Pleasant touch

MODE OF APPLICATION COMPOUND UPGRADE

has been designed for various applications where a natural leathery appearance is to be preserved and subsequent finishing is to be continued with or without snuffing. Its application has a long-lasting impact on hiding surface defects with a soft natural handle maintained.

UPGRADE COMPOUND suits a wide range of articles ranging from garment Nappa, and softy bags to shoe uppers and imparts a characteristic look and touch.

UPGRADE COMPOUND can be applied by hand padding, roller, or spray. For spray applications, a dilution ratio of about 1:3 to 1:4 with water is recommendable. Being weakly cationic in nature, it is compatible with all the cationic, non-ionic, and most of the anionic coats. Getting prediluted with water, it can be well added to the base and intermediate coats in general where a remarkable up-gradation is perceived in quantities of just 7 to 10% of the seasoning mix. While applying heavily in the bottom coat, It’s advisable to incorporate an adhesion promoter like PU in subsequent finishing for better anchorage.

STORAGE COMPOUND

It is advisable to store the product in a dry place and in tightly closed drums. Due to its chemical nature, it is recommended to protect the product against frost and to store it in tightly closed original packing in the temperature range of 5°C and 35°C. It is recommended to stir the product before use. Please correctly dispose of this product, minimizing the environmental impact. Packaging and waste must be disposed of according to local regulations. For user safety, please refer to our safety data sheet before using the product. Safety protection devices should always be used.

BANTI SINGH

Hi I'm Banti Singh, a Chemical Engineer! Welcome all of you to my blog. If you got the information right? Share the information. All of you Thank you

Thanks to visit this site.

Post a Comment (0)
Previous Post Next Post