Titanium Tanning salt is a tanning salt based on Titanium, it has strong tanning properties. 1) It dissolves thoroughly in a pickle bath with pH 1,5 and makes the solution clear and limpid. 2) As the sole tanning agent that gives light colors and compact leathers, endures long damp-shelflife is, and classification is easily achieved. The resulting wet-white leathers recorded Ts values between 72 and 80°C. and re-tanning also achieved up to 100°C.
Appearance: Crystalline Powder
Color: White
Odor: Odourless
Active Matter(%): 85 ± 1
pH (10%): 1.4 at 20°C
Solubility: Soluble in acidified solution at 20°C up to 40
g/l with the formation of colloidal solution
Insoluble Elements: < 0.1%
DELIMING AND PICKING AGENTS BASED ON WEAK ORGANIC AND INORGANIC SALT PRODUCT SPECIFICATIONS
Appearance: Whitish
powder
Ph at 10% : 3.0 – 5.0
Concentration (%) : 100
SALIENT CHARACTERISTICS
·
Special deliming and pickling agent for leather production, where a deep and
fast deliming, for both integral or split kinds of leather, is needed along with the
capability to eliminate the presence of ammonium salts in the effluents.
· Special for automotive
upholstery leather production, since the absence of ammoniacal salts does not
increase the fogging values of these ones.
· Allow complete use
of strong acids as sulphuric or formic in the pickle
·
Reduce drastically the water consumption.
· Increase phiscal propierties due to not acid hidrolisis.
MODE OF APPLICATION
·
Depending on the leather state (divided or integral), the doses can vary
between 3 to 4%.
·
Formulations and work procedure pls contact our technical service